The wind turbine uses NdFeB permanent magnet rotor alternator. The special stator design can effectively reduce the resistance torque of the generator, and make the wind turbine and the generator have better matching characteristics. What matters should be paid attention to in the use process?

Epoxy zinc rich primer plus polyurethane enamel is used for anti-corrosion, anti ultraviolet, acid rain and salt fog. Do not place the negative grounding of the electrical box and the single inverter together, so as to avoid short circuit, and operate correctly according to the inverter power instructions. The small wind turbine should be wired separately and should not be mixed with other lines. DC power supply can also be used for lighting, and AC power output from inverter should be used for household appliances.

When connecting the box, connect the battery first and then the generator output line. When disassembling, first disassemble the generator output line and then disconnect the battery group wiring. The shutdown switch of the controller is usually at the start-up position. It is used for temporary shutdown when the battery is fully charged or in case of severe storm. It can only be turned to the shutdown position when it is running slowly. It is not allowed to rotate the switch at high speed. The fan shall not run without load to prevent the blade from being damaged by high-speed rotation.